"WE PRACTICE CUSTOMERS SERVICE ON SITE AND WE
HAVE ALWAYS GONE WHERE OUR CUSTOMERS ARE!"
 

SAERTEX® founder and Managing Director Bruno Lammers.

 


SAERTEX multiCom® - Headquarter, Saerbeck


Strong foundation from the Münsterland

In 2011 it was decided that at its headquarters in Saerbeck new production capacity and a new administration building should be built to accommodate the ever-growing international non-disruptive sewer renovation market.

The first phase began that summer with the new production hall for the impregnation of glass fibre liners. The highlight of this new hall is the ultra-modern resin mixing plant, which works unlike conventional systems, as a fully automated closed system, and as a complement to the very reliable infusion system, to offer unique quality assurance in the manufacture of GRP-liners.

Early in spring 2012, ground was broken for the generous administration building and the production hall for "dry goods", and the production of dry fibreglass liners up to DN 2200 is now possible with the new production facilities.

Due to the two production halls with a total of 14,000 square meters, and the new administration building with approximately 1,200 square feet, new possibilities and opportunities have emerged. But the Research and Development DEPARTMENT was to be handled by a new, spacious in house laboratory. In particular, the test stand for the testing of new products as well as the training and test site with different profiles and pipe diameters from DN 100 to 1200, complete the application-oriented development of GRP products with regard to the trenchless rehabilitation of pipes.

SAERTEX multiCom® GmbH
Brochterbecker Damm 52
48369 Saerbeck / Germany

Phone: +49 2574 902-400
Fax: +49 2574 902-409
E-Mail: multicom@saertex.com 
 

SAERTEX multiCom® Huntersville, USA


FLEXIBLE CUSTOMER SOLUTIONS FOR AMERICA

In early 2001 SAERTEX® took US production to an ultra-modern production plant in Huntersville near the US economic centre of Charlotte, North Carolina. Since then, the total production area has been expanded to over 11,000 square meters and now represents the largest production of multiaxial fabrics in America.

Therefore, the resulting fibres are used in the automotive and aerospace industries, in the wind industry, boat building and sports and leisure industry and, last but not the least, in the construction industry, such as in the production of liners for the trenchless renovation of sewer pipes.

SAERTEX multiCom® uses this infrastructure as a base for their business. In addition SAERTEX multiCom® opened a distribution centre in Denver, Colorado in 2009 and has invested in the latest UV curing technology. UV systems are available on-site for rent or purchase. In addition to a large UV curing system with a radial compressor capacity of up to 360 m³/hour and a UV dual core with 8 x 1000 Watts, a mobile UV system can also be installed in areas with limited space available.

SAERTEX multicom® LP
12200 Mt. Holly-Huntersville Rd.
Huntersville, NC 28078 / USA
 
Phone: +1 704 584-4059
Fax: +1 704 464-5922
E-Mail: multiComUSA@saertex.com 
www.saertex-multicom.com

SAERTEX multiCom® (Pinghu), China


A rolling stone gathers no moss. (Chinese proverb)

For a number of years SAERTEX multiCom® coordinated all activities for the Asia-Pacific region from their location in Taicang near Shanghai. In the beginning of 2017 the location relocated to Pinghu and a own production was built. The experience of recent years shows that the use of GRP-liners for the non-disruptive sewer renovation in Asia has rapidly increased.

However, countries of Western Asia and Australia have high potential - and so the activities in this area are successfully bundled near Shanghai.

Locally, our customers have the support of experienced application engineers and a UV system is available.

SAERTEX multiCom® (Pinghu) Co., Ltd.
Building #4
No. 1033 Xinxing San Road
314200, Pinghu, Zhejiang / China
 
Phone: +86 573 85799627
Fax: +86 573 85799610
E-Mail: multicom@saertex.com
 

Saerbeck, December 2019

SAERTEX multiCom: WELL POSITIONED FOR THE NEW DECADE

New Managing Director at SAERTEX multiCom: Since autumn Kai Diecks appointed new Managing Director at German quality manufacturer for GRP liners.

Read more...


Saerbeck, November 2019

WE ARE GETTING READY FOR NEW CHALLENGES IN 2020

The year 2019 is slowly coming to an end – already today we would like to thank you for a trusting and successful cooperation in 2019! In order to start the year 2020 together with you successfully and well recovered, we would like to inform you about our upcoming inventory and the company holidays at our plant in Saerbeck:

Read more...


Saerbeck, October 2019

WE ARE NO-DIG AWARD WINNER 2019!

At the "International NO-DIG Conference Florence" in early October, our potable water liner, the SAERTEX-LINER® H2O, was honoured with the "New Technology Award" from the International Society for Trenchless Technology (ISTT).

Read more...


Saerbeck, June 2019

APP FOR THE PIPE SYMPOSIUM ONLINE!

Do you already know our new app for the 8th Saerbeck Pipe Symposium? Here you will find all information about the event in September in Münsterland. Whether programme, exhibitor, side programme or registration: Everything online and always up to date!

Read more...


Read all news items here